Member Page: Andy Martin
Member ID: Andy-SherryStatus: Gold Member
Portland, OR, USA
Member Since: 2010-03-19
Home Site: The Triumph Experience
Email: Sign in to view
Last Login: 2018-04-24 09:33
Forum Posts: 0
Personal Vehicle Registry
No vehicles listed in the Registry.
Member Journal – Andy&sherry's Journal
There are 2 total entries in this Journal.
Posted on: Saturday March 21, 2015
I drilled and tapped a port in the manifold,i built a device(Gizmo) copied from Paul Tegler's site,i drilled and tapped a port in the fuel pump blanking plate,ran a hose from the blanking plate to the air filter. I got an off the shelf PCV valve from Auto Zone. The Gizmo attaches to the aluminium valve cover and the PCV valve is between Gizmo and manifold port. This set up was trial number one,and had no oil coming out of anywhere other than my 2 small drips underneath which have always bee...
Posted on: Saturday May 24, 2014
i spent the last few days swapping the original stock studs for TR6 rear wheel studs. I was fortunate to bump into someone who works at a machine shop who was able to machine the heads to the same specs as the stock ones. Once they were machined the rear dropped straight in and with advice from the guys here I loosened the hat bolts on the front and put the studs in . Hooked everything back up bled the brakes and tightened the new lug nuts and went for a drive. Its good to know the bigger st...
Two Stroke Smoke Library Articles
No tech articles written by this member.